Toilets are obviously crucial for your home, but what if they keep getting clogged? This guide shows you what to do if your toilet keeps clogging.
If you’ve ever had a clogged toilet then you know the panic that sets in when you see the water go up instead of down after flushing. After all, a toilet is an absolute necessity in any home, especially homes with only one bathroom.
But what do you do if your toilet keeps clogging? The answer is simple!
With a little patience and a few common household supplies, you can unclog your toilet in no time. In the event that you have a stubborn clog, you may need to call in a professional plumber.
But before calling in the pros, consider some tips and tricks.
If you’re wondering what to do if your toilet is clogged, then keep reading and this handy guide will teach you how to tackle the toughest problems. You’ll learn how to use various plumbing tools along with when to call the plumber.
Prep Your Toilet
The first rule of thumb is simple: if you’ve flushed once and the water is in your toilet is still clogged then make sure not to flush a second time. You’ll probably only cause your toilet to overflow.
Before trying to unclog your toilet, open the top of your tank, and close the flapper. This will prevent your toilet from overflowing as you prepare to work.
As a precaution, put towels on the floor in your bathroom to absorb potential water overflow. If you have a window, consider opening it in the event the clog brings out some unpleasant odors.
Once you’re prepped your toilet, you’re ready to tackle the toughest of clogs.
Check the Pantry
Did you know that most clogs can be fixed with a few common household items? If you have vinegar, baking soda, and water then you have all the ingredients needed to unclog a toilet.
Begin by mixing two cups of vinegar with equal parts of hot water. Take a cup of baking soda and pour it into your clogged toilet. Once this step is complete add the water/vinegar solution and let it sit for half an hour.
You’ll see your concoction start to fizz which means it’s doing its job. You can try flushing your toilet after half an hour or add more hot water to help the process along.
This simple household trick should do the job, but if it doesn’t try this next professional plumbing hack.
Never Underestimate the Power of a Plunger
A plunger is one of the most common bathroom tools. Unfortunately, if used incorrectly, they fail to do their job leaving you with a clogged toilet.
Prior to using your plunger, make sure you have petroleum jelly available for use. Put a layer of petroleum jelly on the rim of your plunger’s suction cup, ensuring a proper seal is made when submerging it in water.
In addition, if your plunger isn’t completely below the waterline, you’ll fail to get adequate suction.
Best Types of Plungers If Your Toilet Keeps Clogging
Where plungers are concerned, not all are created equal.
When the word “plunger” comes to mind, you probably think about a circular rubber disc on the end of a wooden handle. But what you may not know is this type of plunger is traditionally used for unclogging sinks.
Toilet plungers are similar in nature, but instead of a flat suction cup, they have a rubber flap protruding from inside their cap.
This rubber flap forms a tight seal around your toilet’s drain, providing maximum suction and working to free stubborn clogs.
However, a plunger may not be effective enough for your needs. If you find that a plunger doesn’t unburden your toilet from a stubborn clog, then try this next trick.
Invest in a Toilet Auger
You may have a sink snake and while this will work in a pinch, it doesn’t work the same way a toilet auger does.
Sink snakes pull clogs from a drain while a toilet auger can break the clog apart. If possible, head to the nearest hardware or home improvement store and purchase a toilet auger.
If a sink snake is all you have, that’s okay. Something is better than nothing.
This wire coil may be the solution to your problems, especially if your toilet keeps clogging.
Begin by placing the end of the snake into your toilet, being careful not to scratch your toilet’s porcelain.
The snake will have a crank on it. Turn this clockwise to allow it to follow the natural curve of your toilet’s plumbing.
If you find the snake has resistance, odds are you found the clog. Try to pull the clog out instead of pushing it further into your plumbing.
What to Look for in Toilet Augers
Just like plungers, there are differences between sink snakes and toilet augers. Remember that it’s best to use the appropriate tools whenever possible, as a sink snake may not be enough to unclog your toilet.
Toilet augers, on the other hand, are larger than a traditional sink snake. This makes them easier to use, as you don’t have to hunch over your toilet as you try to unclog it.
You’ll be able to stand comfortably over your toilet as you work on the clog, saving your back from unnecessary stress and strain.
Toilet augers have a bulbous end that you place in your toilet drain, making them powerful at breaking apart even the most stubborn clogs. Toilet augers push the clog through while sink snakes help you pull the clog from your toilet.
With a little finesse, a toilet auger or sink snake should be all you need to unclog your toilet. If you still find you need help, it may be time to call a professional plumber.
Time to Call the Plumber
You’ve tried baking soda and vinegar. You’ve greased up your plunger. You’ve even purchased a toilet auger, yet your toilet keeps clogging.
What should you do?
Now would be the time to call a professional plumber. They’ll get to the root of the problem so you can get back to using your toilet.
Professional plumbers have access to top of the line plumbing tools and have the knowledge to unclog even the most stubborn toilets.
For more information about home repair projects or for up to date news on all things business, music, and fashion, check out more of our blog. If you’ve got questions, we’ve got answers.